83
②
Select the pattern No.
902. Sew the pattern No.
902 while aligning the
inner edge of the presser
foot with the edge of the
pattern (
A
).
①
Sew the pat-
tern No. 901.
・
For sewing pattern
Nos. 901 and 902
in
combination
6.10. Lace / feather / overlapping and tiling (blackwork) patterns
Lace- / feather-like patterns can be pro-
duced by sewing patterns in parallel.
In addition to the above, other patterns
such as decorative patterns can be
sewn with overlapped or tiled a wider
variety of patterns.
No. Pattern
901
902
903
904
No. Pattern
904
906
907
908
No. Pattern
909
910
911
912
No. Pattern
913
914
915
Presser foot
Manual buttonhole presser foot (I)
Example)
■
How to sew a combination of patterns
Leave the machine in
Lock mode
・
For sewing pattern
Nos. 772 and 776
in
combination
・
For sewing pattern
Nos. 778
and 778 in
combination
Caution: In the case of tile stitching, patterns may be slightly misaligned depending on the pat-
terns to be combined, material, thread and type of stitching to be used.
A
B
C
①
Sew the pattern No. 772.
②
Determine starting point
B
of the pattern No.776
so that the pattern can
be sewn accurately
overlapped with the
already-sewn pattern
No. 772. Then, sew the
pattern No. 776 over the
already-sewn pattern No.
772.
①
Sew the pattern No. 778.
②
Providing a space of ap-
proximately 7 mm from the
already-sewn pattern No.
778, adjust starting position
C
of the patterm No. 778 to
the position that is same in
height of the already-sewn
pattern No. 778. Then, sew
the pattern No. 778 with
horizontally inverted.
To Next Page
Loading...
Need help?
General
