Need help?Do you have a question about the JUKI HZL-K85 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | HZL-K85 |
| Category | Sewing Machine |
| Language | English |
Instructions to reduce the risk of electric shock.
Warnings for burns, fire, electric shock, or injury to persons.
Guidelines on usage, environment, and operational safety.
Identifies spool pin and thread guides for thread management.
Identifies operation controls like Start/Stop and reverse buttons.
Identifies parts around the needle and presser foot.
Identifies various presser feet (A, B, C, D, E).
Identifies tools like Oiler, Needles, and Screwdriver.
Explains stitch pattern number, length, and zigzag width indicator.
Describes buttons like Pattern selection, Memory, Clear, Shift, and Needle Up/Down.
Details levers for stitch length and zigzag width adjustment.
Explains how to store letters and patterns into memory.
Explains how to delete stored letters and patterns from memory.
Explains how to select lower patterns from No. 30 to 78.
Details stitches suitable for stretchy fabrics like knits.
Explains automatic lock stitch and reverse stitch buttons.
Describes levers for adjusting stitch length and zigzag width.
Instructions on connecting and operating the foot controller for speed control.
Guide on connecting the power cord to the machine and outlet.
Identifies the main power and light switch.
Explains how to start, stop, and use the reverse stitch function.
Details how to operate the presser foot lever.
Explains how to adjust the sewing speed.
Instructions for increasing or decreasing needle thread tension.
Explains how to lower the feed dog for special sewing.
Instructions on how to extend the free arm.
Steps for opening the hook cover and removing the bobbin.
Details placing the thread spool and cap onto the spool pin.
Instructions for threading the bobbin thread guide.
Details setting the bobbin and starting the winding process.
Instructions for removing the bobbin after winding.
Step-by-step guide to pull the bobbin thread up.
How to adjust the bobbin thread guide for even winding.
Raising the presser foot and threading guides.
Steps for passing the thread through various guides.
Instructions for threading the take-up lever and hook.
Step-by-step guide for the automatic needle threader.
Steps to remove the current presser foot.
Steps to attach a new presser foot.
Instructions for removing and installing the needle.
Guidance on choosing and checking the needle.
Details applications of standard and zipper presser feet.
Identifies overcasting, blindstitch, and buttonhole feet.
Ensuring correct presser foot and selecting pattern.
Steps for adjusting stitch shape using controls.
Explains how well-tensed seams look.
Guidance on fixing low or high upper thread tension.
Table matching fabric types with threads and needles.
Tips on using thread, needles, and handling fabric.
Explains automatic setting and manual adjustment of stitch length.
Table showing stitch patterns and their adjustable lengths.
Explains how the machine sets stitch length automatically.
Details manual adjustment of stitch length using levers.
Explains how to perform a basic straight stitch.
Ensuring correct presser foot and selecting stitch pattern.
Steps for sewing the straight stitch.
Holding fabric, adjusting speed, and stopping sewing.
Trimming threads and knotting them on the fabric's wrong side.
Details straight stitches for elastic fabrics like knits.
How to activate automatic lock stitch at start/end of seams.
Procedures to cancel the automatic lock stitch function.
How to select the first stitch pattern and start sewing.
Instructions on using the reverse stitch button for securing stitches.
How to perform lock stitches using the reverse stitch button.
How to start sewing heavy fabrics smoothly.
How to select the zigzag stitch pattern and its settings.
Using buttons and levers to adjust stitch width.
Lists patterns where stitch width can be adjusted.
Instructions for changing presser foot and sewing overcasting.
How to use this stitch for reinforcing seams on elastic fabrics.
Selecting pattern and placing button on foot.
Examples of buttonhole patterns for different fabrics.
Marking, lowering lever, and sewing buttonholes.
How to adjust stitch length for buttonholes.
Step-by-step instructions for sewing buttonholes.
How to adjust stitch length for buttonholes.
Steps for setting stitch length, pattern, and performing bartacking.
Final steps for bartacking and application examples.
Steps for setting stitch length, pattern, and sewing darning stitch.
Instructions for changing presser foot and selecting pattern for quilting.
How to runstitch fabric pieces together for patch work.
Choosing the correct stitch pattern for patch work.
Choosing the stitch pattern for zipper insertion.
Instructions for inserting zippers using the standard presser foot.
Steps to attach the zipper foot (B) to the machine.
Opening and preparing the seam allowance for zipper insertion.
Instructions for sewing the zipper in a lapped seam.
How to baste the zipper for centered insertion.
Instructions for sewing the zipper in a centered seam.
Instructions for folding fabric and preparing for blindstitch.
Steps for selecting pattern and sewing blindstitch.
How to position the folded edge against the guide.
Steps for adjusting the guide using a screw.
Removing presser foot holder and setting drop feed.
Instructions for installing the quilting foot.
How to sew straight along with the quilt guide.
Checking zipper size and installing standard presser foot.
Instructions for sewing the invisible zipper using the foot.
How to sew the remaining zipper tape on the other side.
Steps to take out the slider and pull it through.
Marking fabric and lowering the buttonhole foot.
Steps for sewing manual buttonholes.
Straight and zigzag stitching for buttonhole sides.
Important cautions to follow during buttonhole sewing.
Cutting fabric corner and inserting it into the foot.
Using handwheel to guide fabric into the hemmer foot.
Removing presser foot holder and attaching the even feed foot.
Describes the smooth surface and suitability for difficult-to-feed fabrics.
Steps for removing needle plate and cleaning lint.
Instructions for removing and cleaning the bobbin case holder.
Lists common problems, their causes, and solutions.
To Next Page
