To Next PageTo Next Page
Need help?Do you have a question about the JUKI LS-1342 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | LS-1342 |
| Category | Sewing Machine |
| Language | English |
Adjusts the vertical and lateral placement of the needle in the throat plate.
Sets the forward and backward movement of the feed dog relative to the needle.
Aligns the feed dog horizontally with the needle hole in the throat plate.
Sets the vertical height of the feed dog relative to the throat plate.
Ensures correct synchronization between the needle and hook for stitch formation.
Sets the vertical position of the hook relative to the needle.
Adjusts the clearance between the inner hook guide and the hook.
Adjusts the height the presser foot lifts using hand or knee control.
Synchronizes the horizontal and vertical feed cam movements for proper feeding.
Controls the alternate vertical movement of the walking foot and presser foot.
Adjusts the horizontal feed arm for proper needle sway and connection.
Sets the stitch length for both forward and reverse feeding.
Balances the machine's operation, particularly for specific models.
Adjusts the position of the lever that controls reverse feeding.
Explains the function and resetting procedure for the safety clutch.
Adjusts the moving knife, fixed knife, solenoid, and cam for thread trimming.
Configures the alternate vertical dial for speed control and movement detection.
Adapts the SC-380 control unit parameters for specific machine models.
Procedures for installing the automatic reverse feed device and its components.
Installation of the automatic presser foot lifter and its components.
Steps for installing the DL device and its related switch.
Procedures for installing the knee lifter shaft for pedal operation.
Instructions for installing the binder kit accessory.
Identifies and provides solutions for common sewing problems like thread breakage.
Diagnoses and resolves issues related to thread trimming failures.
