SEWING MACHINERY BUSINESS UNIT
SEPTEMBER, 2013 Printed in Japan(C)
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO
206-8551, JAPAN
PHONE :
(
81
)
42-357-2254
FAX :
(
81
)
42-357-2274
http://www.juki.com
✽
Specifications and appearance are subject to change without prior notice for improvement.
✽
Read the instruction manual before putting the machine into service to ensure safety.
✽
This catalogue prints with environment-friendly soyink on recycle paper.
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in
the research, development, design, sales, distribution,and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
(1) The development of products and engineering processes
that are safe to the environment
(2) Green procurement and green purchasing
(3)
Energy conservation (reduction in carbon-dioxide emissions)
(4) Resource saving (reduction of papers purchased, etc.)
(5) Reduction and recycling of waste
(6) Improvement of logistics efficiency (modal shift and
improvement of packaging, packing, etc.)
Type
Standard wider zigzag (with a gauge for 5mm zigzag width)
Code
0AA
Standard wider zigzag (with a gauge for 8mm zigzag width) 0AB
Standard/3-step zigzag
4A
Standard/3-step zigzag (with anti-material-slip type)
4AT
3-step zigzag / scallap
7A
Model name
Max. sewing speed
Lift of the presser foot
Hook
Thread take-up
Lubrication
Lubricating oil
Needle (at the time of delivery)
Needle position changing mechanism
Reverse feed stitching mechanism
Max. feeding amount
Stitch system
Stitch pattern
Max. zigzag width
By hand: 5.5 mm, By knee: 10 mm
DP hook (with titanium-treated inner hook)
Rotary type
Fully automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
134SUK (Nm70)
Provided as standard
Provided as standard
LZ-2287A
—
3-step zigzag / scallap
10 mm
2.5 mm
Without automatic
thread trimmer
With automatic
thread trimmer
LZ-2280A
(
A
)
—
Standard zigzag
5 mm
2.5 mm
LZ-2280A
(
B
)
—
Standard wider zigzag
5,000 sti/min
8 mm
5 mm
LZ-2284A
LZ-2284N-7
Standard / 3-step zigzag
5 mm (standard)
10 mm (3-step)
2.5 mm
※
※
"0B" is applied only to LZ-2284A and 2284AT
"0B"and "00" are Direct-Drive head
Automatic reverse feed function
Not provided
Code
without automatic reverse feed function 00
with automatic reverse feed function
0B
Type
Code
Standard /
3-step zigzag
4A
Wiper
Wiper and automatic reverse feed function
Code
Provided
Automatic reverse feed function
Provided
WB
LZ228
LZ2284A7WB
Triangular cam Grooved cam
SPECIFICATIONS
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
＊
sti/min stands for Stitches per Minute.
Needle throw pattern cam
To order, please contact your nearest JUKI distributor.
SC-920A
CP18A
CP180A
Control boxLZ-2280A series (without automatic thread trimmer)
LZ-2280A-7 series (with automatic thread trimmer)
Operation panel
Auto-lifter
Code
Not provided
Provided
AK
To Previous Page
Loading...
Need help?
General
