Soft seams can be produced by lowering
the bobbin thread tension.
GRF0100000B0 (asm.)
400-16408 Hook gib VS
Presser foot connecting components
① B1551-586-000
Presser foot connecting foot
② SS-7090910-TP
Screw
The aforementioned parts are used when a lockstitching type presser foot is installed on
the machine. Select a parts set of either the presser-bar changing type or the presser bar
joining type, according to the type of presser foot of your machine.
The device enables the operator to perform reverse feed
stitching using the pedal without using the right hand.
OPTIONS
SPECIFICATIONS
LZ-2282N LZ-2285N
—
LZ-2280NU LZ-2284NU
LZ-2282N-7
—
LZ-2284C-7
—
LZ-2284NU-7
Model
—
M097
Part No.
225-61559
MAM-097000A0
Description
Automatic reverse feed Kit
Fagotting feller asm.
(down-rolled type)
Feature
Model
name
5,000sti/min
＊
Provided as standard
Provided as standard
Provided as standard
Provided as standard
—
—
—
—
4,500sti/min
＊
235-12817
235-12908
235-13062
100-61554
100-64004
225-91564
225-48010
225-48119
225-48671
225-82407
225-81508
235-03162
Without automatic thread trimmer
With automatic thread trimmer
Standard zigzag
10.0mm
1
2
Parts for sewing with thick thread
(recommended needle:
DP×5 #21, 134SUK Nm130)
Pedal-operated reverse feed
stitching device (RF-1)
Presser foot connecting components
Hook gib
225-56054 Knife unit
D1440-583-H00 Needle thread guide
400-17095 Thread tension disk (asm.)
225-80369 Presser foot (asm.)
This device allows a machine without thread trimmer to perform automatic
reverse feed function.
RF-1 GRF-010000B0
The device enables the operator to perform reverse feed stitching using the
pedal without using the right hand. (excluding the LZ-2285N)
This is the exclusive fagot stitch folder for the LZ-2285N, which is applicable to
the sewing of lingerie, foundation garments and baby wear.
(The fagot stitch folder asm. (up-rolled type):
The MAM-09700BA0 has been factory-installed on the machine prior to delivery.)
Stitch system
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. feeding amount
Lift of the presser foot
Min. cutting allowance of lower knife
Lower knife driving method
Hook
Thread take-up
Lubrication
Lubricating oil
Needle (at the time of delivery)
Needle position changing mechanism
Reverse feed stitching mechanism
Needle throw pattern cam
Standard Guage
(at the time
of delivery)
Needle plate
Feed dog
Presser foot (asm.)
DP hook (with titanium-treated inner hook)
Rotary type
Fully automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
438 (Nm70),
DP×5 (#10)
438 (Nm70),
DP×5 (#10)
5,000sti/min
＊
4.5mm
2.5mm
3.0mm
AC motor
Standard zigzag
(with lower knife)
By hand: 4.0mm
By knee: 8.5mm
Triangular cam Triangular camGrooved cam Grooved cam
4,000sti/min
＊
8.0mm
2.2mm
Fagoting
By hand: 5.5mm
By knee: 8.0mm
By hand: 5.5mm
By knee: 10.0mm
438 (Nm80) 438 (Nm80)
Standard/
3-step zigzag
10.0mm (standard)
10.0mm (3-step)
2.5mm (standard)
2.0mm (3-step)
＊
sti/min stands for Stitches per Minute.
Pedal-operated reverse
feed stitching device
To Next Page
Loading...
Need help?
General
