JUKI MO-104D User Manual

SERVICE MANUAL
MO-114D/104D
2-Needle, 4-Thread Overlock Sewing Machine
MO-114D
MO-104D

JUKI MO-104D Specifications

General

Type	Overlock
Maximum Stitch Length	4 mm
Differential Feed	Yes
Presser Foot Lift	5 mm
Built-in Rolled Hemming	Yes
Differential Feed Ratio	2.0
Overlocking Width	5.6 mm
Maximum Sewing Speed	1, 500 stitches/min
Needle System	130/705H
Thread Tension Control	Manual
Lighting	LED light

Summary

Specifications

Removing Order of Covers

Front Cover

Instructions for removing the front cover of the sewing machine.

Base Plate

Instructions for removing the base plate of the sewing machine.

Rear Cover

Instructions for removing the rear cover of the sewing machine.

Cloth Plate

Instructions for removing the cloth plate of the sewing machine.

Installation of Throat Plate

Height of Needle Bar

Position of Feed Dog

Adjusting Stroke of Main Feed Dog

Adjusting Stroke of Sub Feed Dog (MO-114D)

Height of Feed Dog

Feed Dog Timing

Position of Balance Weights and Cams

Projecting Amount of Upper Looper

Radius of Lower Looper

Adjusting Lower Looper Thread Guide Lever

Adjusting Loop Lift

Timing Between Upper and Lower Looper

Installation of Needle Guards

Position of Upper Looper Thread Take-up

Height and Lateral Position of Presser Foot

Adjusting Floating Amount of Thread Tension Disk

Thread Tension Controller

Position of Needle Thread Take-up

Belt Tension

Position of Lower Knife

Engagement of Upper Knife with Lower Knife

Position of Cloth Plate

Adjusting Presser Foot Pressure