To Next PageTo Next Page
Need help?Do you have a question about the JUKI MO-814 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | MO-814 |
| Category | Sewing Machine |
| Language | English |
Install the thread stand as shown in the figure and set it to the table.
Install the oil reservoir support post and waste cloth chutes to the frame support plate.
Details on motor pulley and belt specifications for different machine speeds and frequencies.
Procedure for installing the machine head onto the frame support plate using vibration absorbing rubber.
Important warnings before operating the machine, including lubrication and rotational direction.
Reasons and corrective measures for needle breakage, including wrong needle or guard relation.
Reasons and corrective measures for knives not cutting properly, such as wear or improper installation.
Reasons and corrective measures for skipped stitches, like looper relation or thread tension.
Reasons and corrective measures for thread breakage, including thread quality and tension.
