SPECIFICATIONS
Type
Sewing speed
Needle
Thread
Max. stitch length
Stitch adjusting method
Thread take-up
Automatic reverse
feed function
Needle bar stroke
Hook
Lift of the presser foot
Alternating vertical
movement
Alternating vertical
movement adjusting method
DL device
Safety mechanism
Bobbin thread winder
Bottom-feedmicro-
adjustment mechanism
Lubrication
Distance from needle
to machine arm
Post height
Bed size
Knee-lifter
Auto-lifter
Weight of the
machine head
Air consumption
PLC-1710-7 PLC-1710 PLC-1760-7 PLC-1760 PLC-1760L
1-needle
With automatic
thread trimmer
2,500sti/min
9mm (forward / backward)
TEX 50〜135
36mm
Vertical-axis 1.6-fold capacity hook (latch type)
Slide type
By dial
By hand: 9mm, Auto: 16mm
517mm×178mm
161.7mm
255mm
Lubrication: Centralized tank method * Lubrication with an oiler for the hook section
Provided as standard
Built in the machine arm
Provided as standard
12mm (forward / backward)
TEX 105〜270
−
With automatic
thread trimmer
Thick-thread
long-pitch type
38mm
Vertical-axis 1.6-fold
capacity hook (cap type)
1,800rpm（P=0〜10mm）
1,600rpm（P=10〜12mm）
134×35 Nm110〜160
Standard Nm140
134×35 Nm140〜200
Standard Nm200
−
Pneumatic type By lever Pneumatic type By leverBy lever
1〜6.5mm 2.5〜6.5mm 1〜6.5mm 1〜6.5mm2.5〜6.5mm
Dial Slot slide Dial DialSlot slide
Provided as standard
0.3dm3/min（ANR）
55kg
Provided as standard
−
−
55kg
Option
Provided as standard
0.3dm3/min（ANR）
56kg
Provided as standard
−
−
56kg
Option
Provided as standard
0.3dm3/min（ANR）
58g
Option
Provided as standard
−
Provided as standard Option
−
2-needle
Model name
INDUSTRIAL SEWING MACHINE DIV.
✽
Specifications and appearance are subject to change without prior notice for improvement.
✽
Read the instruction manual before putting the machine into service to ensure safety.
MARCH, 2011 Printed in Japan(C)
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO
206-8551, JAPAN
PHONE :
(
81
)
42-357-2254
FAX :
(
81
)
42-357-2274
http://www.juki.com
＊"sti/min" stands for "Stitches per Minute."
To Previous Page
Loading...
