Need help?Do you have a question about the JUKI DDL-8700-7 and is the answer not in the manual?
General| Max Stitch Length | 5 mm |
|---|---|
| Needle Bar Stroke | 30.7 mm |
| Lift of the Presser Foot | By hand: 5.5 mm, By knee: 13 mm |
| Lubrication | Automatic |
| Needle | DB×1 |
| Hook | Full rotary hook |
| Power Requirement | Single-phase 100~120V, 200~240V |
| Motor | Direct-drive servo motor |
| Weight | 45 kg |
Essential safety warnings before and during control panel installation.
Safety warning and steps to enter the machine head adjustment mode.
Detailed steps for using the one-touch setting mode.
Configuring thread trimming frequency and target achievement buzzer.
How to enter, modify, and save function settings.
Selecting function numbers and specifying connector settings for I/O.
Procedure for compensating the pedal sensor's neutral point.
Activating, deactivating, and selecting drive types for the auto lifter.
Restoring all function settings to their default values.
Procedures for displaying the latest and previous error codes.
To Next Page
