Need help?Do you have a question about the JUKI DDL-8700A-7 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | DDL-8700A-7 |
| Category | Sewing Machine |
| Language | English |
Steps for physically setting up the sewing machine on the table, including positioning and securing.
Instructions for mounting the pedal sensor onto the sewing machine table and connecting it.
Guide for connecting the power switch to the machine's control box and securing the AC input cord.
Steps for connecting the rod to the pedal lever and adjusting pedal stroke for easier operation.
Detailed instructions on how to wind thread onto the bobbin using the bobbin winder.
Procedure for setting the correct height of the presser foot lift using the knee lifter.
Steps to assemble and install the thread stand unit into the machine table.
Guidelines for filling the oil pan and ensuring adequate oil supply for machine operation.
Instructions for checking and adjusting oil splash levels in the hook and face plate parts.
Procedure for correctly inserting and tightening the sewing needle into the needle bar.
How to properly insert the bobbin into the bobbin case and thread the bobbin thread.
Guide to setting the desired stitch length using the dial on the machine.
Instructions for adjusting the pressure exerted by the presser foot on the material.
Explanation of how to use the hand lever to lift or lower the presser foot.
Procedure for adjusting the vertical position or angle of the presser foot.
Step-by-step guide on how to thread the sewing machine head.
How to adjust needle and bobbin thread tension for proper stitch formation.
Instructions for adjusting the stroke and pressure of the thread take-up spring.
Guide to adjusting the thread take-up stroke for different material types.
How to adjust the timing between the needle and the hook for optimal stitch formation.
Procedure to adjust the vertical height of the feed dog for proper material feeding.
How to adjust the tilt of the feed dog to prevent puckering or uneven feeding.
Steps to adjust the timing of the feed dog's movement for advanced or delayed feed.
Instructions on how to adjust or re-sharpen the counter knife for thread trimming.
Adjusting pedal pressure and stroke for optimal control during sewing operation.
Connecting the pedal and adjusting its angle for comfortable and precise operation.
Basic steps for turning on the machine, needle movement, and pedal operation for sewing.
Explanation of the controls and indicators on the sewing machine's built-in control panel.
How to program and use various sewing patterns, including reverse feed and overlapped stitching.
Guide to quickly setting common functions like thread trimming and material end sensor.
Details on using functions for production volume management, operation measurement, and bobbin counting.
Procedure for accessing and modifying various machine functions through the control panel.
A comprehensive list of machine functions, their settings, and corresponding page references.
In-depth explanations for specific function settings, including soft-start and needle bar stop position.
Procedure for calibrating the pedal sensor to ensure accurate operation after replacement.
How to set the machine to match different types of connected pedal sensors.
Instructions for enabling or disabling the auto-lifter function and selecting drive type.
Guide to activating the key-lock feature to prevent unintended changes to settings.
Steps for safely removing the machine's rear cover for maintenance or inspection.
How to connect the pedal for a standing work setup, including connector details.
Information on using external connectors for signals like rotation and status.
Guide for connecting and configuring the material end sensor for automatic stop.
Procedure to reset all machine settings to their factory default values.
Steps for safely replacing blown fuses, including identifying correct fuse types and locations.
Procedure for adjusting the machine head angle when there's excessive slip between markers.
Diagram showing the location and identification of various connectors on the main board.
List of error codes, their causes, and corresponding corrective measures for troubleshooting.
To Next Page
