Need help?Do you have a question about the JUKI DDL-8700B-7 and is the answer not in the manual?
General| Max Stitch Length | 5 mm |
|---|---|
| Needle Type | DB x 1 |
| Lubrication | Automatic |
| Stitch Type | Lockstitch |
| Needle Size | 9 to 18 |
| Lubricating Oil | JUKI Sewing Machine Oil |
Step-by-step guide for physically setting up the sewing machine on the table.
Instructions for mounting the pedal sensor to the sewing machine table.
Details on connecting the pedal, power supply, and machine head connectors.
Guidance on connecting the power cord, including grounding wire.
Detailed procedure for winding thread onto the bobbin using the bobbin winder.
Step-by-step guide for threading the sewing machine head.
Adjusting both needle and bobbin thread tensions for balanced stitches.
Adjusting the timing and clearance between the needle and hook.
Adjusting the timing of the feed dog's movement for proper stitch formation.
Step-by-step guide to operating the sewing machine, including starting and stopping.
Procedure for adjusting the machine head alignment and timing.
Procedure to reset and calibrate the pedal sensor's neutral position.
Lists common phenomena, causes, and corrective measures for machine errors.
To Next Page
