Need help?Do you have a question about the JUKI DDL 227 and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Lock Stitch |
| Max Stitch Length | 5 mm |
| Needle Type | DB x 1 |
| Needle System | DB x 1 |
| Motor | Clutch motor |
| Stitch Length | 5 mm |
| Bobbin Type | Rotating hook |
| Motor Type | Clutch Motor |
Adjusting oil flow to thread take-up and needle bar components using an oil adjusting pin.
Adjusting oil flow to hook components using an oil regulating valve on the hook shaft.
Procedures for inserting and removing the bobbin case from the sewing hook assembly.
Steps for winding thread onto the bobbin using the bobbin winder mechanism.
To Next Page
