Need help?Do you have a question about the JUKI DDL-8000A and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Motor Type | Direct-drive motor |
| Thread Trimmer | Automatic |
| Max. Stitch Length | 5mm |
| Needle Bar Stroke | 30.7mm |
| Lift of the Presser Foot | By hand: 5.5mm, By knee: 13mm |
| Control Panel | Digital |
| Lubrication | Automatic |
Details specifications of the sewing machine head, including lubrication, seam, needle, etc.
Provides crucial safety precautions for carrying and placing the machine.
Guide on how to adjust the oil amount for the hook mechanism and the implications of incorrect levels.
Detailed explanation of each button and function on the operation panel and their uses.
General guide on how to access and change function setting values for various machine parameters.
How to adjust the timing between the needle and the hook for correct stitch formation.
Instructions for checking and adjusting the thread trimming cam timing for proper operation.
How to adjust the main shaft stop position using function setting P72 and aligning marker lines.
Information on grease shortage warnings (E220) and errors (E221) and their meaning.
Lists various error codes and provides instructions on how to correct them.
To Next Page
