JUKI DDL-8000A - Setting the Function Keys (F1 and F2)

❻
❽
❾ 󱢳
A B
4-7. Setting the function keys (F1 and F2)
The functions you use frequently can be registered to these two function keys.
The set value of the function setting number that is registered can be directly changed by pressing
❾
and
󱢳
.
1) The function setting screen is displayed
by keeping
❾
switch or
󱢳
switch held pressed for three seconds
in the normal sewing state.
A
indicates the function setting number.
B
indicates the set value for that func-
tion setting number.
2) The display section
A
shows the function switch F1 or F2 you have pressed. The display section
B
shows
the currently-registered function setting number that is ashing on and o󰀨.
3) Select the function setting number you want to register by pressing
❻
.
4) Press
❽
to determine the function setting number to be registered. Then, the sewing machine re-
turns to the normal setting state.
* If you want to registered the function setting that belongs to the service level, the power should be turned
ON, in prior, while keeping
󱢵
held pressed. Then, return to the sewing screen by pressing
󱢵
.
On the sewing screen, carry out the aforementioned steps of procedure 1) to 4).
– 32 –