⇔
4-8-3. How to display the operation rate of the sewing machine
1) Setting the production support parameters
No. Item Setting range Initial value
U12
Changeover of the
display of operation
rate between ON /
OFF
The display of the operation rate (display section
E
) is
changed over between ON / OFF.
1: Operation rate is displayed
0: Operation rate is not displayed
0 - 1 1
Display section E
Display section E
When this parameter is set to "1", the operation rate of the sewing machine is displayed in the normal sew-
ing state and on the production support screen. (Display section
E
)
2) When you keep
held pressed for three seconds, the display on the display section
E
is
changed over between the "operation rate of sewing machine" and the "target achievement rate".
< Sewing-machine operation state display state >
< Target achievement rate display screen >
Operation rate calculating method:
Time during which the sewing machine runs from the starting time
(U03) of work hours to the current time
(excluding the work break)
Operation rate
of the sewing
machine
Work hours from the work starting time (U03) to the current time
(excluding the work break)
=
×
100
Display section
E
:
Display of the sewing-machine operation rate
Display section
E
:
Display of the target achievement rate
– 35 –
To Next Page
Loading...
Need help?
General
