Need help?Do you have a question about the JUKI DDL-9000C-S and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Max Stitch Length | 5 mm |
| Needle Bar Stroke | 30.7 mm |
| Automatic Thread Trimmer | Yes |
| Type | Industrial Sewing Machine |
| Max Sewing Speed | 5, 000 sti/min |
| Motor Type | Servo Motor |
| Lubrication | Automatic |
| Hook | Rotary hook |
| Presser Foot Lift | By hand: 5.5 mm |
Important warnings and precautions for setting up the machine.
Step-by-step instructions for installing the sewing machine.
Instructions for mounting the control box on the table.
Details on connecting the power switch cable.
Wiring instructions for connecting the power source cord.
Guide to connecting internal cables to the control box.
Instructions for filling the oil tank and lubricating the machine.
Basic guide to using the operation panel.
Detailed explanation of each button on the operation panel.
Step-by-step guide to basic sewing machine operation.
Instructions for correctly installing the sewing needle.
How to insert and remove the bobbin case.
Procedure for winding thread onto the bobbin.
Detailed steps for threading the needle and machine head.
How to adjust thread tension for both needle and bobbin.
How to adjust the pressure of the presser foot.
How to set and adjust the stitch length via the panel.
How to adjust the machine's sewing speed.
How to adjust the oil amount for the hook lubrication.
How to register and select sewing patterns.
A list of error codes, their causes, and items to check.
Procedure for adjusting the feed dog height.
Instructions for cleaning the sewing machine.
Steps for safely replacing the fuse.
How to adjust the timing between the needle and the hook.
How to adjust the thread trimming mechanism.
How to handle grease shortage alarms.
Procedure to reset K118 errors.
To Next Page
