Need help?Do you have a question about the JUKI DDL-9000B-SS and is the answer not in the manual?
General| Max Stitch Length | 5 mm |
|---|---|
| Needle Type | DB x 1 |
| Lubrication | Automatic Lubrication |
| Type | Industrial Sewing Machine |
| Max Sewing Speed | 5, 000sti/min |
| Motor Type | Servo Motor |
| Needle Size | #9-#18 |
Adjusts needle thread tension by turning tension nuts clockwise or counterclockwise.
Adjusts bobbin thread tension by turning the tension adjusting screw.
Sets the standard needle stop position by aligning pulley cover marker with handwheel marker.
Adjusts needle UP/DOWN stop position via control box settings and switches.
Adjusts needle bar height by loosening a setscrew and aligning marker lines.
To Next Page
