JUKI DDL-9000C-S - 6-6. Replacing the fuse

4-6. List of errors
Error
code
Description of error Cause Item to be checked
E000 Execution of data
initialization (This is
not an error.)
• In the case the machine head is
changed.
• In the case the initialization operation is
executed.
E007 Motor overload • In the case the machine head is
changed.
E009 Overtime of solenoid
energization
• In the case the machine head is locked.
• In the case of sewing extra-heavy
weight material that exceeds the
guaranteed material thickness.
• In the case the motor fails to rotate.
• In the case of the motor or driver failure.
• Check whether the pulley is entangled
with thread.
• Check whether the motor output
connector has loosened.
• Check whether the motor can be
turned smoothly by hand.
E011 Media is not inserted • In the case no media is inserted. • Turn the power OFF and check for a
media.
E012 Read error • In the case data stored on the media
cannot be read.
• Turn the power OFF and check for a
media.
E013 Write error • In the case data cannot be written on
the media.
• Turn the power OFF and check for a
media.
E014 Write protect • In the case the media is placed in the
write-prohibition state.
• Turn the power OFF and check for a
media.
E015 Format error • In the case formatting of the media
cannot be carried out.
• Turn the power OFF and check for a
media.
E016 External media over-
capacity
• In the case the capacity of media is not
enough.
• Turn the power OFF and check for a
media.
E032 File compatibility
error
• In the case the le is not compatible. • Turn the power OFF and check for a
media.
E071 Slip-off of the motor
connector
• In the case the motor connector has
slipped off.
• Motor current detection circuit has
broken.
• In the case there is no current
feedback.
• Check for looseness and slip-off of
the motor output connector.
E072 Motor overload when
the thread trimmer
operates
• Overload state occurs while the thread
trimming operates.
E081 Feed driving motor
lock
• In the case the feed driving motor is
locked.
• Check whether the feed driving motor
operates smoothly.
E204 USB insertion • In the case the sewing machine is
started up without removing the USB
thumb drive.
• Remove the USB thumb drive.
E220 Warning against
shortage of grease
• When the predetermined number of
stitches is reached.
• Add grease to the specied points of
sewing machine and reset the error.
E221 Grease-shortage
error
• In the case the sewing machine
cannot continue sewing since the
predetermined number of stitches is
reached.
• Add grease to the specied points of
sewing machine and reset the error.
– 52 –