❼❻
❽
A B
4-6. Function setting
The set value of the function setting can be changed.
1) The function setting screen is displayed
by keeping
held pressed for
three seconds in the normal sewing
state.
A
indicates the function setting number.
B
indicates the set value for that func-
tion setting number.
2) Press
❼
to ash function setting No.
A
on and o. In this state, press
❻
to select
the function setting number you want to set.
(The gure shows the function setting No. P08, that is used for setting the number stitches to be sewn
using the soft-start function.)
3) Press
❼
to ash setting No.
B
on and o. In this state, change the set value by pressing
❻
.
4) Press
❽
to determine the set value.
5) Press
to return the sewing machine to the normal sewing state.
In the case of changing the set value for other function setting number, repeat the steps of procedure 2), 3)
and 4). Then, nally carry out step of procedure 5).
6) The function setting items are classied into two dierent levels; user level and service level.
In the case of displaying the function setting items that are classied to the service level, turn the power
ON while keeping
held pressed.
– 31 –
To Next Page
Loading...
Need help?
General
