JUKI DDL-8700A-7 - Presser Bar Height Adjustment; Machine Head Threading

– 13 –
1) Loosen setscrew
1
, and adjust the presser bar
height or the angle of the presser foot.
2) After adjustment, securely tighten the setscrew
1
.
1
15. Adjusting the height of the presser bar
16. Threading the machine head
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.