JUKI DDL-8700A-7 - Specifications

– 1 –
S : Medium-weight materials
H : Heavy-weight materials
DDL-8700AS-7 DDL-8700AH-7
Max. sewing speed 5,000 sti/min 4,000 sti/min
Thread trimming speed 300 sti/min 300 sti/min
Stitch length
4mm 5mm
Presser foot l
ift
(by knee l
ifter)
13 mm 13 mm
Needle
*1
DB x 1 (#14) #9 to 18 DB x 1 (#21) #20 to 23
Lubricating oil JUKI MACHINE OIL #7 JUKI MACHINE OIL #7
• The sewing speed will vary depending on the sewing conditions.
• The sewing speed preset at the time of shipping ...... AS-7 : 4,000sti/min.
...... AH-7 : 3,500sti/min.
*
1
: Needle used depends on the destination.
!
. SPECIFICATIONS
Supply voltage Single phase 100 to 120V 3-phase 200 to 240V Single phase 220 to 240V
Frequency 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz
Operat
ing environ-
ment
Temperature : 5 to 35˚C
Hum
idity 35 - 85 % or less
Temperature : 5 to 35˚C
Humidity 35 - 85 % or less
Temperature : 5 to 35˚C
Humidity 35 - 85 % or less
Input 2
10VA 210VA 210VA
DDL-8700A - 7
Noise
- Equivalent continuous emission sound pressure level (L
pA
) at the workstation :
A-weighted value of 79.5 dB; (Includes K
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO
11204 GR2 at 4,000 sti/min.