ā 18 ā
1
2
5
3
4
(1) Installing the connecting rod
1) Move pedal
3
to the r
ight or left as illustrated
by the arrows so that motor control lever
1
and
connect
ing rod
2
are stra
ightened.
(2) Adjusting the pedal angle
1) The pedal tilt can be freely adjusted by changing
the length of the connecting rod.
2) Loosen adjust screw
4
, and adjust the length of
connecting rod
2
.
26. Adjustment of the pedal
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
To Next Page
