JUKI DDL-8700A-7 - Sewing Pattern Operation

– 22 –
3. Operating procedure of the sewing pattern
(Caution) Refer to the Instruction Manual for each operation panel for how to operate sewing patterns us-
ing other operation panel than the built-in panel of the machine head.
(1) Reverse feed stitching pattern
Reverse feed stitching at sewing start and reverse feed stitching at sewing end can be separately pro-
grammed.
[Setting procedure of the reverse feed stitching]
1
) Effective/ineffective of the reverse feed stitching
pattern can be changed over by pressing
switch
1
.
When the reverse feed st
itching pattern is ren-
dered effective, LED
C
l
ights up, the number of
stitches of the reverse feed stitching at sew-
i
ng start is displayed on
A
, and the number of
stitches of the reverse feed stitching at sewing
end is displayed on indicator
B
.
Select a process (A, B, C or D) the number of
stitches for which is to be changed by using
switch
4
.
The number which is ashing on and of
f repre-
sents the process which is being set.
Change the number of stitches for the selected
process by using
switch
5
and switch
6
.
Press
switch
3
to conrm the change you
have made. (The number of stitches that can be
set is 0 to 15.)
(Caution) The sewing machine cannot perform sew-
ing when the display of the number of stitches
for a process is ashing on and off.
2) When the number of reverse feed stitches dis-
play is not ashing on and off, every press on
switch
3
changes over the reverse feed
stitching mode from the "reverse feed stitching
at sewing start," "double reverse feed stitching
at sewing start" and "no reverse feed stitching at
sewing start."
In addition, every time
switch
5
is pressed,
the reverse feed stitching feature changes over
from the reverse feed stitching at sewing end to
the double reverse stitch at sewing end, then to
no reverse feed stitching at sewing end, in turn.
6
543
A
B
C
53
1 2
Without reverse
stitching
R
everse
stitching
Double reverse
stitching