JUKI DDL-8700A-7 - Page 26

– 23 –
A : Number of stitches of normal stitching setting
0 to 15 stitches
B : Number of stitches of reverse stitching setting
0 to 15 stitches
C : Number of stitches of normal stitching setting
0 to 15 stitches
D : Number of times of repetition
0 to 9 times
(Caution) When process D is set to 5 times, the sewing is repeat
-
ed as A
/
B
/
C
/
B
/
C.
A
B
C
B
C
D
6
543
A
B
D
2
(2) Overlapped stitching pattern
Overlapped stitching pattern can be programmed.
[Setting procedure of the overlapped stitching]
1
) Effective/ineffective of the overlapped stitching
pattern can be changed over by pressing
switch
2
.
When the overlapped st
itching pattern is ren-
dered effective, LED
D
l
ights up.
2) Select a process (A, B, C or D) the number of
stitches for which is to be changed by using
switch
4
.
The number which is ashing on and of
f repre-
sents the process which is being set.
3) Change the number of stitches for the selected process by using
switch
5
and switch
6
.
4) Press
switch
3
to conrm the change you have made.
(The sewing machine does not run unless the setting has been conrmed by pressing
switch
3
.)
(Caution) The overlapped stitching pattern is carried out under automatic operation mode. Once the pedal
is depressed, the sewing machine will automatically perform sewing of the number of overlapped
stitches.