To Next PageTo Next Page
Need help?Do you have a question about the JUKI TL-18QVP and is the answer not in the manual?
General| Sewing Speed | Up to 1, 500 stitches per minute |
|---|---|
| Needle Threader | Automatic |
| Stitch Type | Straight Stitch |
| Needle Bar Stroke | 35 mm |
| Weight | 25.4 lbs (11.5 kg) |
| Type | Single Needle Lock Stitch |
| Throat Depth | 8.5 inches |
| Motor | Servo Motor |
| Stitch Length | 6 mm |
| Needle Type | HAx1 |
Specific warnings for electric shock hazards.
General warnings for personal injury, fire, and shock.
Guidelines for servicing double-insulated sewing machines.
Explains warning marks and pictographs for safe operation.
Lists specific precautions for operating the sewing machine safely.
Technical specifications of the sewing machine.
Lists and illustrates all included accessories with the sewing machine.
Identifies and labels the main components of the sewing machine.
Step-by-step guide for installing the auxiliary table.
Instructions for connecting and installing the foot controller.
Steps for attaching the knee lifter lever to the machine.
Explains the operation of the main power switch.
Describes how to adjust the sewing speed using the control knob.
Explains the function and use of the manual thread cutter.
Details the automatic and foot switch for thread trimming.
How to adjust the stitch length using the dial.
Explains the function of the needle up/down control switch.
How to use the reverse feed stitch lever for locking stitches.
Instructions for adjusting and understanding the presser foot pressure.
How to use the drop-feed knob for free embroidery stitching.
Guide to using the automatic needle threader lever.
How to use the micro-lifter for adjusting presser foot height.
How to adjust the brightness of the LED sewing light.
Steps for properly installing the thread guide for bobbin winding.
Instructions for removing the bobbin from its case.
How to thread the bobbin winder guide correctly.
Steps for placing the bobbin onto the winding shaft.
Procedures for starting, winding, and finishing the bobbin.
Instructions for loading the wound bobbin into the bobbin case.
How to insert the bobbin case into the sewing machine hook.
How to adjust the bobbin winder guide for even winding.
Step-by-step guide for threading the sewing machine needle and bobbin.
How to draw up the bobbin thread to the needle area.
Guidance on performing initial test sewing to ensure proper function.
Instructions for disabling the thread trimming foot switch.
How to perform reverse feed stitching for securing seams.
Method for creating a knot on the reverse side of the fabric.
Guide to adjusting needle and bobbin thread tension for optimal stitches.
Table showing recommended material, thread, and needle combinations.
Guide to performing decorative topstitching with recommended thread and needle.
Step-by-step instructions for correctly installing and checking a sewing needle.
Instructions for creating a rolled hem using a specialized foot.
Guide for attaching zippers using the appropriate foot.
How to pivot the material to change sewing direction.
Instructions for using the upper feed presser foot for difficult materials.
Using the quilt guide with the walking foot for consistent quilting stitches.
Fine-tuning the quilt guide's position for precise sewing.
Instructions for using the compensating presser foot for edge sewing.
Instructions for using the 1/4" (7mm) presser foot for piecing.
Guide to using various quilting feet for different quilting techniques.
How to clean the feed dog and hook components.
Guide on where and how to lubricate the sewing machine.
Safety precautions for handling sewing machine oil.
Information about available optional accessories for the sewing machine.
Specific optional quilting feet for advanced techniques.
Solutions for skipped stitches, including needle and threading issues.
Causes and fixes for needle thread breakage.
Troubleshooting steps for bobbin thread breakage.
Reasons and solutions for needle breakage.
How to fix puckered stitches by adjusting tension and pressure.
General methods for improving overall stitch quality.
Solutions for excessive noise during machine operation.
Troubleshooting for handwheel rotation issues.
How to resolve problems with material feeding.
Solutions for issues encountered during needle threading.
