EN
Threading the machine
CAUTION:
Turn OFF the power switch when threading or passing thread.
Pass the thread
through the thread
guide
1
.
When using a thread
such as nylon thread
which easily slips out of
the thread path, thread
the machine head as
illustrated in the circled
gure.
1
2
Thread the machine
head in numerical
order,
2
to
8
.
1
7
8
6
4
2
Sub-tension knob
・
Pass the thread through the
space between the two ten-
sion disks.
・
The standard thread tension
is achieved when the end
face of the screw at the cen-
ter of the knob is ush with
the end face of the knob.
* To pass the thread though thread tension dial
3
, rstly raise the presser
foot lifting lever and provide a space between the tension disks.
* Bring the thread take-up
7
to the upper end of its stroke. Then, pass
the thread through it.
Thread
take-up
3
Thread tension
disk
Pass the thread through
the clearance between the
two thread tension disks.
3
Pass the thread
through the thread
guides
9
and
!0
.
5
15
To Next Page
Loading...
Need help?
General
