JUKI TL-18QVP User Manual

EN
Threading the machine
■
Drawing up the bobbin thread
1
Hold the end of the needle thread with your
left hand.
2
Press the needle up/down switch.
Normally press two times, to make needle move down
and then up.
3
Bobbin thread is drawn out.
4
Draw both the needle thread and bobbin
thread for about 10cm.
Bring both the needle and the bobbin threads under the
presser foot, and draw them uniformly from the far end
of the presser foot.
17

JUKI TL-18QVP Specifications

General

Sewing Speed	Up to 1, 500 stitches per minute
Needle Threader	Automatic
Stitch Type	Straight Stitch
Needle Bar Stroke	35 mm
Weight	25.4 lbs (11.5 kg)
Type	Single Needle Lock Stitch
Throat Depth	8.5 inches
Motor	Servo Motor
Stitch Length	6 mm
Needle Type	HAx1