To Next PageTo Next Page
Need help?Do you have a question about the JUKI TL-15 and is the answer not in the manual?
General| Stitch Type | Straight stitch |
|---|---|
| Thread Tension | Adjustable |
| Stitch Length | 6mm |
| Sewing Speed | 1, 500 spm (stitches per minute) |
| Needle | HAx1 (#9-#18) |
Specific warnings to prevent electric shock hazards when using the machine.
Broad safety guidelines covering fire, burns, injury, and child supervision.
Guidance for servicing machines with double insulation, excluding USA/Canada.
Explains the purpose of general warning and caution marks in the manual.
Defines the meaning of various pictographs used throughout the manual.
Lists important precautions for using the sewing machine to prevent damage or accidents.
Describes the machine's safety device that stops operation due to overheating.
Details all the accessories provided with the sewing machine.
Visual identification of key components of the sewing machine with labels.
Step-by-step guide for attaching the auxiliary table to the sewing machine.
Instructions for connecting the foot controller to the sewing machine.
Guide on how to install the knee lifter lever for presser foot control.
Explains the functions of power switch, speed control, and thread trimming.
Details stitch length adjustment, needle up/down switch, and reverse stitch lever.
Covers presser foot pressure, drop-feed, and automatic needle threading.
Instructions for setting up the thread guide before winding the bobbin.
Comprehensive guide for properly winding thread onto the bobbin.
Guides for inserting the wound bobbin and adjusting the winder guide.
Detailed instructions for guiding the needle thread through the machine.
Instructions for operating the automatic needle threading mechanism.
Steps to bring the bobbin thread up to the needle area.
Guide on how to execute a test sewing to verify machine function.
How to turn off or use the thread trimming foot switch.
Technique for sewing reverse stitches to lock seams.
Method for making a knot on the back of the fabric as a finishing touch.
Guide to adjusting the tension screw on the bobbin case for proper balance.
Identifying and correcting issues with needle thread tension being too high or low.
Recommended combinations of materials, threads, and needles.
Tips for topstitching and choosing the correct needle size.
Step-by-step instructions for correctly installing a sewing needle.
How to inspect the needle for damage that could cause sewing problems.
Guides for attaching and positioning the zipper foot for sewing zippers.
How to change the material's sewing direction while keeping the needle down.
Instructions for fitting and using the upper feed presser foot for difficult fabrics.
Steps to assemble and use the quilt guide with the even feed foot.
How to set the quilt guide for precise seam allowances and stitching intervals.
Guide to fitting and using various types of quilting feet.
Instructions for cleaning the feed dog and hook areas for optimal performance.
How and where to apply oil to the sewing machine for smooth operation.
Overview of optional parts for lightweight and heavyweight materials.
Guide for attaching and using the hemming foot for creating neat hems.
How to install and use the compensating presser foot for straight edges.
Instructions for using the 1/4" (7mm) presser foot for piecing with precise seam allowances.
Lists common sewing issues like skipped stitches and thread breaks with solutions.
Addresses issues with handwheel, material feeding, and needle threading.
