JUKI TL-15 - Component Functions and Setup Procedures; Advanced Adjustments and Threading Features

Name and Function of each component
■
Presser foot pressure regulator and its
indicator
Turning the presser foot pressure regulator adjusts the
pressure of the presser foot.
By turning the regulator pointer of the indicator goes up
or comes down.
■
Drop-feed knob
Set the knob to “FEED” for normal stitching.
Set the knob to “NO FEED” for free embroidery stitch-
ing.
■
Needle threader lever (Automatic needle
threader)
Lower the threading lever, pass the needle thread
through the lever and pass the thread through the nee-
dle’s eye. (This lever can be used for the needle #11-
#16.)
Increase Decrease
For normal stitching For free embroidery
stitching
* Feed dog comes down.
(NO FEED)
(FEED)
(NO FEED)
(FEED)
11