To Next PageTo Next Page
Need help?Do you have a question about the JUKI TL-2010Q and is the answer not in the manual?
General| Maximum Sewing Speed | 1, 500 stitches per minute |
|---|---|
| Stitch Length | Up to 6mm |
| Automatic Thread Trimmer | Yes |
| Needle Up/Down Control | Yes |
| LED Light | Yes |
| Thread Tension Control | Manual |
| Type | Lockstitch |
| Presser Foot Lift | Up to 12mm |
| Dimensions | Approx. 430 x 180 x 360 mm |
| Weight | 25.4 lbs |
| Bed Size | 8.5 inches |
Key safety precautions, including DANGER and WARNING notices.
Steps for attaching and adjusting the auxiliary table to the sewing machine body.
Connecting the foot controller and attaching the knee lifter lever.
Using the power switch, speed control knob, and thread trimming features.
Adjusting stitch length, needle position, and reverse feed stitch.
Adjusting presser foot pressure, drop feed, and using the automatic needle threader.
Steps for installing the thread guide and preparing the bobbin.
Procedure for removing the bobbin case and installing the bobbin correctly.
Instructions for the winding process and loading the bobbin into the case.
Guidance on adjusting the bobbin winder guide for proper thread winding.
Steps for passing the thread through the main guides and tension disks.
Detailed procedure for threading the needle using the automatic threader.
How to draw up the bobbin thread to the top of the needle area.
Steps for preparing the machine and fabric for test sewing.
Performing reverse feed stitch and creating a knot on the fabric reverse.
How to adjust the bobbin case tension for proper thread balance.
Identifying and correcting issues with needle and bobbin thread tension.
Guidance on topstitching, including needle and thread selection.
Procedure for installing the hemming foot and creating rolled hems.
Steps for installing and using the zipper foot for sewing zippers.
Technique for rotating the material to change the direction of sewing.
Using the upper feed foot for difficult materials like velvet or jersey.
How to use the compensating foot for sewing straight material edges.
Instructions for fitting and operating the quilting foot for various quilting styles.
Procedure for cleaning the feed dog and hook to ensure smooth operation.
Guide on where and how to apply machine oil for proper lubrication.
Solutions for stitch skipping, thread breakage, puckering, and feed problems.
Resolving noise, handwheel rotation, and needle threading difficulties.
