Jula Axley - Safety Instructions; General Safety Precautions; Electrical Safety; Operational Safety

EN
22
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use!
Please retain for future reference.
Electric shock can cause death. For this reason, it is extremely important to follow the instructions below.
• Only use the fountain pump for its intended purpose and observe these safety instructions at all
times.
• The user is responsible for any injuries caused directly or indirectly by incorrect use.
• Do not use the fountain pump if the cable or the pump housing appears to be damaged.
• Do not repair or replace damaged cables. In such cases the fountain pump is to be considered
unusable and must be thrown away.
• The socket to which the fountain pump is connected must have been earthed (do not use
unearthed electrical sockets or extension cables).
• Use a residual current device with a tripping current of not more than 30mA.
• The power supply must match the value on the rating plate.
• Do not carry the fountain pump by its cord.
• You must observe current legislation and regulations when using the fountain pump in a garden
pond or swimming pool. Contact a qualied electrician in the event of any uncertainty.
• The fountain pump must not be running when people are in the water.
• Outdoor use also necessitates a 10-metre-long rubber-insulated cable.
• Switch o the power to all electrical products in contact with the water before cleaning or
servicing the fountain pump.
• Do not use the fountain pump in water to which chlorine, acidic or basic solutions have been
added, because these aect the durability of the hose. Do not use the fountain pump in saltwater.
• Do not allow the fountain pump to run dry. This could lead to irreparable damage.
TECHNICAL DATA
Rated voltage 230VAC / 50Hz
Power 75W
Maximum delivery head 2.7m
Max. ow 44l/min
Max. immersion depth 3m
Max. water temperature 35°C
Protection IPX8
Operating instructions for
fountain pump
ENGLISH