Julabo F25-HD User Manual

19532420.DOC
Operating Manual
Refrigerated and Heating Circulators
FS18-HD
F25-HD
F26-HD
F32-HD
F33-HD
F34-HD
F33-SD
• with proportional cooling capacity control
FP40-HD / SD
FP45-HD / SD
FP50-HD / SD
Changes without prior notification reserved
1.953.2420BU6 02/03
JULABO USA, Inc.
754 Roble Road, Suite 180
Allentown, PA 18103
 (610) 231-0250  (610) 231-0260
EMAIL us: info @ julabo.com
ONLINE Catalog: www.julabo.com

Julabo F25-HD Specifications

General

Category	Medical Equipment
Pump Capacity	15 L/min
Pump Pressure	0.35 bar
Pump Flow Rate	15 L/min
Heating Capacity	2000 W
Refrigerant	R134a
Power Supply	230 V / 50 Hz

Summary

Safety Warnings

1. Operating controls and functional elements

5.3. Filling / draining

5.4. Temperature application to external systems

6. Operating procedures

6.1. Power connection

Instructions for connecting the unit to the mains power supply safely.

6.2. Switching on - Start/Stop

Procedure for turning the circulator on and off and understanding its operating states.

6.3. Setting the temperatures

6.4. Warning functions

6.5. Setting the safety temperature (with shutdown function)

6.6. Internal / external control

6.7. PID control parameters

7. Menu functions

7.1. ATC - Absolute Temperature Calibration

Procedure for calibrating temperature measurements using the ATC function.

7.4. r - Remote

Configuring remote control options via serial interface or analog connector.

8. Troubleshooting guide / Error messages

9. Safety recommendations

10. Electrical connections

Serial RS232/RS485 interface

Programmer input / Temperature recorder output

11. Remote control

11.1. Setup for remote control

Configuration steps and factory settings for remote control via serial interface.

11.2. Communication with a PC or a superordinated data system

11.3. List of commands

Detailed list of commands for querying parameters and temperature values.

11.4. Status messages / error messages

Explanation of status messages indicating the circulator's operating state.

14. Technical specifications