Julabo FP40-HD User Manual

19532420.DOC
Operating Manual
Refrigerated and Heating Circulators
FS18-HD
F25-HD
F26-HD
F32-HD
F33-HD
F34-HD
F33-SD
• with proportional cooling capacity control
FP40-HD / SD
FP45-HD / SD
FP50-HD / SD
Changes without prior notification reserved
1.953.2420BU6 02/03
JULABO USA, Inc.
754 Roble Road, Suite 180
Allentown, PA 18103
 (610) 231-0250  (610) 231-0260
EMAIL us: info @ julabo.com
ONLINE Catalog: www.julabo.com

Julabo FP40-HD Specifications

General

Brand	Julabo
Model	FP40-HD
Category	Medical Equipment
Language	English

Summary

Safety Warnings

Operating Controls and Functional Elements

Description

Preparations

Installation

Guidelines for properly placing and setting up the circulator unit.

Bath Liquids and Tubing

Filling / Draining

Operating Procedures

Power Connection

Steps for safely connecting the circulator unit to the mains power socket.

Switching On - Start/Stop

How to turn the circulator on, perform self-test, and put it into operation mode.

Setting the Temperatures

Guide on how to set the working temperatures T1 and T2 for the circulator.

Warning Functions

Configuration and behavior of high and low temperature warning limits.

Setting the Safety Temperature (with shutdown function)

How to adjust the excess temperature protection and its shutdown mechanism.

Internal / External Control

Instructions for selecting and switching between internal and external temperature control modes.

PID Control Parameters

Explanation and adjustment of PID control parameters for optimal performance.

Menu Functions

ATC - Absolute Temperature Calibration

Troubleshooting Guide / Error Messages

Safety Recommendations

Electrical Connections

Serial RS232/RS485 Interface

Connector for External Pt100 Sensor

Remote Control

Setup for Remote Control

Steps to configure interface parameters and set the remote control mode.

Communication with a PC or a Superordinated Data System

List of Commands

Status Messages / Error Messages

Technical Specifications