How to fix JUMAO Medical Equipment when concentrator works, but yellow light illuminates?
If your JUMAO Medical Equipment concentrator's oxygen concentration is decreasing but still within a safe range, try cleaning or replacing the filters. Also, ensure the unit has enough ventilation by moving it at least 10 cm (4 inches) away from walls, draperies, furniture, or similar obstructions.
What to do if the nasal cannula has more mirage or blobs in JUMAO Medical Equipment?
If the nasal cannula of your JUMAO Medical Equipment has excessive mist or blobs, it could be due to several reasons: * Ensure the machine is at least 10 cm away from walls, other obstructions or heaters to ensure complete ventilation and prevent high operating temperatures. * Check the fan inside the machine. If it's not running or running slowly, take out the winker that locks the fan. * Make sure you add cold water to the humidifier bottle. * Ensure the water level in the humidifier bottle is between the maximum and minimum liquid levels.
How to troubleshoot JUMAO Medical Equipment that stops with lights and buzzer?
If your JUMAO Medical Equipment concentrator stops running immediately, the green and yellow lights are always on, and a continuous buzzer sounds, check the following: 1. Ensure the four corns plug-in of the valve is completely inserted. 2. If the exhaust sound buffer box is jammed, replace it. 3. If you can’t open the valve, replace it. 4. If the main electronic control circuit board has failed, replace it.
Essential safety warnings and precautions for operating the oxygen concentrator.
Guidelines for safe and proper installation of the oxygen concentrator.
Recommendations for optimal and safe placement of the oxygen concentrator unit.
Critical safety information regarding fire hazards and explosion risks.
Safety instructions and warnings related to the maintenance of the oxygen concentrator.
Information on potential radio frequency interference and precautions.
Instructions to reduce risks of burns, electrocution, fire, and personal injury.
Overview of the JMC5A Ni oxygen concentrator's intended use and function.
Key features and components of the oxygen concentrator.
Detailed technical specifications including power, flow, concentration, dimensions, and environmental conditions.
Step-by-step guide for safely unpacking the oxygen concentrator.
Procedures for inspecting the oxygen concentrator for damage after unpacking.
Guidelines for properly storing the oxygen concentrator.
Identification and explanation of the main components and controls of the oxygen concentrator.
Steps to prepare the device and its accessories before operation.
Detailed instructions on how to power on and start the oxygen concentrator.
Explanation of the various alarm signals and their meanings during operation.
Specific indicators for oxygen concentration levels using colored lights.
Procedures for safely powering down and unplugging the oxygen concentrator.
Glossary of symbols used in the manual and on the device.
Instructions for regular cleaning of the exterior of the oxygen concentrator.
Guide for cleaning and replacing the different types of filters in the concentrator.
Procedures for cleaning, disinfecting, and disassembling the humidifier bottle.
Guidance on maintaining or replacing the oxygen nasal cannula.
Recommendations for maintaining or replacing internal tubing.
Specific notes for preparing the unit for a new patient.
Details regarding warranty, free repair, and out-of-scope repair cases.
Guidelines for the proper treatment and disposal of waste and residuals.
Information on compatible accessories and spare parts for the oxygen concentrator.
Guidelines for safe operation regarding electromagnetic emissions and immunity.
General| Brand | JUMAO |
|---|---|
| Model | JMC5A Ni |
| Category | Medical Equipment |
| Language | English |
To Next Page