a) When there is a new call record, in the on-hook state, the back light will be lit for 10 seconds, and
the new call icon on the LCD will light up; after the new call record is reviewed, the new call icon will
disappear.
b) Note:
After the incoming call is received and the handset is picked up, the new incoming call icon will
disappear.
8. Talking the names when the calls come in:
A). You can set the talking times on menu setting when the calls from the white-list come in;
It will only talk the numbers, NOT the name, when the call is not in the white-list.
B). There is a preprogrammed 10 second announcement for an incoming call that is not in the
white list. After the announcement the call will be disconnected.
9. Voice Mail:
a）There is an icon on the LCD for Voice mail.
b）Function：
To use the voice mail function, you must apply for this service at your local telephone company
1) If the voice mail message is sent after the ring tone, the message can be received. The mailbox
icon on the LCD will be lit. In the on-hook state, the mailbox icon will be flashing. The time
period is about 200MS every 2 seconds.
2) After checking the mailbox, the telephone company will send a clear signal, and the mailbox icon
will disappear. Alternatively, after receiving this signal; you can also delete the mailbox icon
manually: when there is a voice mailbox prompt, press and hold the DEL key for 3 seconds,
the LCD will display: MSG WAITING OFF, the voice mailbox record will be cleared.
10. Back light function:
The back light will come on if there is an incoming ring, key operation, and parallel machine
pick-up or hang-up operation, it will stay on for 8 seconds. If there is no operation within 8
seconds, then the backlight will turn off.
To Next Page
Loading...
Need help?
General