been deleted now.
5. Call Waiting (CW) Function:
When you are talking on the 1st call, on handset or speaker mode, and the 2nd call is calling, you can
hear a beep sound and the number from the 2nd call will show on the LCD, press flash key to answer
the 2nd call and then press the flash key again to get back the 1st call. (Note: the number from 2
nd
call
will show on LCD even it’s from white-list or nonwhite-list)
Note: The call waiting function in this unit will not work well when using a telephone without
call waiting function and also not supported by your telephone provider.
6. Call back the calls records:
On-hook state:
1． Use UP/DOWN to select the numbers you want to call back, press DIAL key to confirm the
number, and pick up the handset of the phone, it will then dial out automatically the number.
2. There are only three situations where you can adjust the number to call back: the number is 10
digits; the 7-digit local number shows that the 3-digit area code has been filtered out; the 7-digit local
number shows that the long-distance number 1 and the 3-digit area code have been filtered out. By
pressing the DIAL key, the number will be adjusted according to the following conditions:
（1） The 7-digit，local number, which also displays the 3-digit area code or the 7-digit local
number that has been filtered out, and the long-distance number 1 and 3-digit area code
that have been filtered out: Press the DIAL key once, the LCD displays the 7-digit
number, and press the DIAL key again the LCD displays 10-digit number, press DIAL
key again, LCD displays 11-digit number. When you see the number, you want to dial,
pick up the handset of the phone and it will dial out automatically the number displayed.
（2） For a 10-digit number displayed on the LCD, press the DIAL button once, the LCD
displays 11 digits, press the DIAL button again, the LCD displays 10 digits, and press
the DIAL button again, the LCD displays 7 digits When you see the number you want
to dial pick up the handset of the phone and it will dial out automatically the number
displayed.
（3） Note: You must set the area code 3 digits to the area code of the line the caller ID box
is connected to. E.g., If your phone number is 480-759-2255 your area code must be
set to 480
7. Indication for new incoming calls：
To Next Page
Loading...
Need help?
General