When a new caller ID number is the same as the previous old caller ID number from the call records,
then the call record for the previous one will be replaced by the recent call; If the previous caller ID
number is a new incoming call, then the RPT icon will be lit up. When you are looking over the RPT
numbers, the RPT icon will not disappear, when there is a new caller and this number is the same as
the RPT numbers, then the RPT icon will disappear, as the RPT icon will light up only when the new
incoming call comes in.
2. Reviewing the Call records:
Press the DOWN key to view the incoming calls from the last group, press the UP key to view the
incoming calls from the first group, if there is no information, it will display "NO CALLS", and between
the first group of records and the last group of records, it will display "END OF LIST".
3. Delete the caller information and full deletion.
（1）Delete a group of incoming calls:
In the off-hook or on-hook state, press the UP or DOWN key to select the call you want to delete, press
the DEL key once, "Delete?" is displayed on the screen, press the DEL key again to confirm and delete
the group of incoming calls. The LCD displays the next incoming call, If you don’t want to delete, you
can press UP/DOWN to exit and continue to check.
(2) Delete all incoming calls:
In the off-hook or on-hook state, press the UP/DOWN key to display any incoming call, press and hold
the DEL key for 3 seconds, the display changes to "DEL ALL CALLS?", press the DEL key again to
display "NO CALLS", all the memories will have been deleted.
4. Save the Incoming call number to the whitelist:
In the on-hook state, press the UP or DOWN key to display any incoming call, and press the red OK
key (Add to the Whitelist key) to get this number into the white-list, press DIAL key to confirm and enter
“Recording...” to start the recording, please note you can only record for 3 seconds and please when
recording the name there must silence no background noise, No AC, Fans, TV etc. Now the name
recording is set! Please note just push OK key to save this number into whit-list directly if you don’t
need a name recording for this number.
How to delete a number in the white-list? Push the red OK key to enter the white-list, and use UP
and DOWN key to find the number that you want to delete, push DEL key once and the LCD shows
“Delete?”, press the DEL key again to confirm and this number is deleted. And if you want to delete all
the numbers in the white-list at one time, then hold and push DEL key for 3 seconds the LCD will show
“Del All Calls?”, push the DEL key again to display "NO CALLS", all the numbers from white-list have
To Next Page
Loading...
Need help?
General