Jumbuck HS-UM006D - Page 9

Assembly Instructions
Remove all contents from packaging, and make sure all parts are present before attempting to assemble! Tighten all bolt
connections by hand first, then when the grill is fully assembled, go back and
STEP 1
Assemble legs and left side shelf as shown.
STEP 2
Assemble the left and right side shelf.
Remove all contents from packaging, and make sure all parts are present before attempting to assemble! Tighten all bolt
connections by hand first, then when the grill is fully assembled, go back and
tighten.
Remove all contents from packaging, and make sure all parts are present before attempting to assemble! Tighten all bolt