Need help?Do you have a question about the JUMO ATH.-SE Series and is the answer not in the manual?
Explains hazard symbols for personal injury, material damage, documentation, and disposal.
Clarifies the meaning of the 'NOTE!' symbol for important product information.
Introduces ATH.-SE thermostats, their function, and operating principle (fluid expansion).
Details the meaning of markings found on the device's nameplate.
Explains the composition and significance of the product's order code for customization.
Provides technical drawings showing the physical dimensions of the thermostats.
Step-by-step guide on how to safely open the thermostat's housing for access.
Instructions for fixing the thermostat based on its shaft or capillary configuration.
General information and guidelines for handling temperature probes and thermowells.
Specifies the maximum permissible pressure values for thermowells under various conditions.
Details the correct method for installing the temperature probe into the medium.
Covers essential safety and compliance requirements for electrical installation.
Illustrates the connection diagrams for different thermostat types and configurations.
Instructions for securely closing the device housing after electrical connections are made.
Explains how to properly secure the cable and protect it from strain and vibration.
Step-by-step guide on adjusting the temperature limit value using the setpoint adjuster.
Procedure to reset and unlock the safety temperature limiter after a trip.
Table detailing control ranges and temperature probe specifications.
Provides technical data for capillary length and temperature probe materials.
Outlines the electrical properties, including switching elements and contact ratings.
Covers mechanical build, housing, and environmental influence on performance.
Describes various process connection types, materials, and fitting lengths.
Lists the certifications and approval marks obtained by the device.
Information on maintenance-free operation and proper cleaning procedures.
Guidelines and warnings related to returning the device for repair or other reasons.
Table detailing the presence of hazardous substances in product components as per SJ/T 11364.
Explains hazard symbols for personal injury, material damage, documentation, and disposal.
Clarifies the meaning of the 'NOTE!' symbol for important product information.
Introduces ATH.-SE thermostats, their function, and operating principle (fluid expansion).
Details the meaning of markings found on the device's nameplate.
Explains the composition and significance of the product's order code for customization.
Provides technical drawings showing the physical dimensions of the thermostats.
Step-by-step guide on how to safely open the thermostat's housing for access.
Instructions for fixing the thermostat based on its shaft or capillary configuration.
General information and guidelines for handling temperature probes and thermowells.
Specifies the maximum permissible pressure values for thermowells under various conditions.
Details the correct method for installing the temperature probe into the medium.
Covers essential safety and compliance requirements for electrical installation.
Illustrates the connection diagrams for different thermostat types and configurations.
Instructions for securely closing the device housing after electrical connections are made.
Explains how to properly secure the cable and protect it from strain and vibration.
Step-by-step guide on adjusting the temperature limit value using the setpoint adjuster.
Procedure to reset and unlock the safety temperature limiter after a trip.
Table detailing control ranges and temperature probe specifications.
Provides technical data for capillary length and temperature probe materials.
Outlines the electrical properties, including switching elements and contact ratings.
Covers mechanical build, housing, and environmental influence on performance.
Describes various process connection types, materials, and fitting lengths.
Lists the certifications and approval marks obtained by the device.
Information on maintenance-free operation and proper cleaning procedures.
Guidelines and warnings related to returning the device for repair or other reasons.
Table detailing the presence of hazardous substances in product components as per SJ/T 11364.
General| Brand | JUMO |
|---|---|
| Model | ATH.-SE Series |
| Category | Thermostat |
| Language | English |
To Next Page
