JUMO LOGOSCREEN 601 Manual

57
9 Function modules
9.5 Rising edge detection
This function module detects a rising edge (transition 0 -> 1) .
Call
R_TRIG<instance> (CLK);
Input
Output
Comment
The operating principle of the function module corresponds to the following program code:
VAR CLK : BOOL; END_VAR
VAR Q : BOOL; END_VAR
VAR M : BOOL := FALSE; END_VAR
Q := CLK AND NOT M;
M := CLK;
The Q output remains at its Boolean value from one call until the next. It follows the transition of the input
signal (CLK) from "0" to "1" and returns to "0" the next time it is called.
Example
IF reset_flag THEN
bool_out01 := FALSE;
END_IF;
R_TRIG01 (bool_in01);
(* detection of a rising edge at input bool_in01 *)
bool_out01 := R_TRIG01.Q;
(* short pulse at output bool_out01 for rising edge at input *)
Parameter Data type Description
<Instance> 01 to xx (specify instance with two digits)
CLK BOOL Due to a rising edge (0 -> 1) at CLK, Q = TRUE
Parameter Data type Query
Q BOOL OUT := R_TRIG<instance>.Q;

JUMO LOGOSCREEN 601 Specifications

General

Brand	JUMO
Model	LOGOSCREEN 601
Category	Measuring Instruments
Language	English