14
Removing or inserting the battery
Your key is needed to lock the battery
to prevent it from unintentional
detachment or from theft.
Put the provided spare key in a safe
place in the event that you lose the
first key. Take note of the key number
that was provided to you along with your key set
to make a new spare if needed.
To remove the battery:
▪ Insert the key into the key lock of the
battery.
▪ Turn the key for half a turn, counter
clockwise (to the left) to unlock the
battery.
▪ Firmly push the battery along the
battery holder bracket towards the
front, being careful not to hit the bike
frame.
To Insert the battery:
▪ Insert the key into the key lock of the
battery.
▪ Turn the key for half a turn, counter
clockwise (to the left) to unlock the
battery.
▪ Check the battery holder bracket to
ensure there isn’t any water
accumulation. Then align and firmly
push the battery along the battery
holder bracket towards the rear.
▪ Turn the key for half a turn, clockwise
(to the right) to lock the battery in
position.
To Next Page
Loading...
