SMART VISU SERVER + PHILIPS HUE 16
1. Create the action in the Actions tab,
allocate the action as necessary
to an area and select the type of
action as Event [1].
2. Select an Action trigger. Here, for
example, “Switch Good Bye”
push-button and define the state for
triggering the action: “State OFF”[2].
3. Add the appropriate Functions – here
Hue lamps – [3] to the action.
6.2 “Goodbye” action
This action is to switch off all Hue lamps when leaving the apartment by pressing a button.
4. Specify which Status the functions
(Hue lamps) have when triggered [4],
e.g.:
Lamp off
Brightness/dimming value 0 per-
cent
5. After you have saved the action, it can
be called in the SV-Home under
Actions [5] and via the KNX button.
1
2
3
4
5
To Next Page
Loading...
