Jung Smart Visu Server - Saving the Project Configuration

SMART VISU SERVER + PHILIPS HUE 17
1. To save your project file, call SV-Con-
trol. Save the project and your
configuration under Download [1] in
the Project tab.
7. Saving the project
Congratulations – Philips Hue has now been connected to the Smart Visu Server in accordance with the installation example and is set up.
Don’t forget to save your project data and activate access protection!
2. To reactivate the access protection
for your system, call up the access
control page with
[2].
3. Enter the password and activate the
protection by clicking on the selected
area [3].
1
2
3