SMART VISU SERVER + SONOS 14
1
2
3
4
5
6
. Under Settings, enter the previously
created KNX group addresses for the
Dimmer+Switch function [].
Play/Pause (1-bit) > switch > push but-
ton
Volume (1 byte) > value > rotary knob
The list selection [2] on the right next to
the input fi elds shows you all suitable
group addresses of the installation [3].
. Navigate to the Coupling tab [].
. Now connect (couple) the KNX group
addresses to the Sonos loudspeaker
or the Sonos group (Kitchen) [].
. Ensure that the Master button
[] is
activated for all Sonos loudspeakers
in this group.
7.2 Connect loudspeaker to KNX rotary sensor (step 2 of 2)
To Next Page
Loading...
