Jung Smart Visu Server - Control Sonos with KNX Push-Button Sensor

SMART VISU SERVER + SONOS 15
. Create a function for the KNX
push-button sensor. Select the area
Kitchen [], assign a name e.g.
KNX -> Sonos Kitchen (push-button)
[].
7.3 Connect loudspeaker to KNX push-button sensor (step 1 of 2)
The following steps help you with the set-up for controlling Sonos with the KNX push-button sensor.
. Select the function type Virtual Dim-
mer [].
. Under Settings, enter the previously
created KNX group addresses for the
Virtual Dimmer function []. If neces-
sary, use the list function on the right
next to the input fi eld.
 Volume (4-bit) > dim > rocker 1.
1
2
3
4