SMART VISU SERVER + ASTRO FUNCTION 7
1. On the KNX tab, enter the IP address
of the KNX IP interface in the KNX IP
Gateway [1] fi eld.
2. Then import the required group
addresses [2].
4.1 Create areas and functions
After you have established the connection to the KNX bus, you now create areas and functions in the SV Server.
Note: The following is based on a confi gured system with already created functions and rooms.
3. You can create rooms (areas) [3] and
functions [4] in the Areas & Functions
tab.
4. Allocate the appropriate group
addresses [5] to the function.
1
2
3
4
5
To Next Page
Loading...
