Jung Smart Visu Server User Manual

SMART VISU SERVER + PHILIPS HUE 3
Philips Hue can be integrated into
your JUNG Smart Visu Server
with just a few steps.
The table here gives an overview of
the necessary steps.
On the following pages, the
individual steps are described
in detail.
STEP PAGE
1. Download Philips Hue app 4
2. Install the Philips Hue Bridge 4
3. Add the Philips Hue Bridge to the app 4
4. Make light setup 5
5. Make room setup 6
6. Set brightness and colours 7
7. Add additional lamps 8
8. Create more rooms and allocate lamps 9
9. Connect the Smart Visu Server to the IP network 12
10. Connect the Philips Hue Bridge to the Smart Visu Server 13
11. Connect the Philips Hue lamps to the Smart Visu Server 13
12. Edit Philips Hue lamps 14
13. Configure actions 15
14. Save project 17
2. Overview

Jung Smart Visu Server Specifications

General

Category	Server
RAM	1 GB
Product Name	Smart Visu Server
User Interface	Web-based
Power Supply	24 V DC
Mounting	DIN rail
Interfaces	Ethernet, USB
Processor	ARM-based processor
Operating System	Linux
Network	Ethernet 10/100 Mbps