Jung Smart Visu Server User Manual

SMART VISU SERVER + PHILIPS HUE 4
1. Open the Hue app. The search for
a new Bridge starts automatically. If
this is not the case, press the Search
button.
3. Commissioning Philips Hue
Install the Philips Hue App on your smartphone and integrate the Hue Bridge to your home network.
3.1 Initial operation
For the initial operation, in normal circumstances there is no confi gured Hue Bridge present. The initial operation of the Philips Hue is carried out as follows:
2. As soon as a Bridge is found, select
Set up.
3. Connect the Bridge to the Hue app. 4. Accept the terms of use and press
Enable.

Jung Smart Visu Server Specifications

General

Category	Server
RAM	1 GB
Product Name	Smart Visu Server
User Interface	Web-based
Power Supply	24 V DC
Mounting	DIN rail
Interfaces	Ethernet, USB
Processor	ARM-based processor
Operating System	Linux
Network	Ethernet 10/100 Mbps