SMART VISU SERVER + REMOTE ACCESS 3
The MyJUNG remote access for your
SV Server can be set up in a few steps.
The table here gives an overview of the
necessary steps.
The individual steps are described in
detail on the following pages.
STEP PAGE
1. Register at the MyJUNG portal 4
2. Purchase remote access for your Smart Visu Server 5
3. Call Smart Visu Server locally via web browser 6
4. Open SV Control and register device 7
5. Activate remote access via MyJUNG portal 8
6. Set up remote access on terminal devices (Windows PC, Android or iOS device) 9
2. Overview
To Next Page
Loading...
