Jung Smart Visu Server - Commissioning Smart Visu Server

SMART VISU SERVER + PRESENCE SIMULATION 6
4. Commissioning Smart Visu Server
Integrate the Smart Visu (SV) Server in your home network.
 Call the SV Server via the web browser of your terminal device (PC, laptop, tablet).
To do so, enter the address http://sv-server.local or the IP address of the SV Server allocated by the router.
 If the SV Server is protected by a password, enter this.
1. Select the SV-Control button [1].
2. Create a new project with Start [2] or
import an existing one with Restore
[3] and navigate to the KNX tab.
1
2
3